Why Is My Tumble Dryer Blowing Cold Air?

If your tumble dryer is not heating up, it could be dvery own to among a couple of troubles. While you have the right to call an engineer to fix the trouble, this can be expensive and also might be unessential. Sometimes, you’ll be able to deal with these troubles yourself through nopoint more than a replacement component and a little of recognize how. We’ve put together a basic guide on exactly how to detect the concerns via your tumble dryer and what you have the right to execute to settle them.

You are watching: Why is my dryer blowing cold air

One of the many widespread reasons your tumble dryer decides to blow out cold air instead of hot is, rather ironically, because it has actually overheated. Manufacturers have a legal necessity to ensure that as soon as your dryer gets too hot tright here is some develop of control in area to prevent it capturing fire. This is where your thermal overload cut-out comes into play – it is designed to stop working if your dryer gets also hot.

In some models this must be quickly fixable – some tumble dryers have reset butlots on the back of the machine so all you will certainly must perform is organize in the switch and wait for it to click.

If your tumble dryer does not have a recollection button it is likely you will should relocation your thermostat and also thermal overfill cut-out (TOC).

What causes a tumble dryer to overheat?

Tright here are assorted reasons a tumble dryer could fail, including:

The filter hasn’t been cleaned regularly enough. If you don’t clean the filters after usage, dust will develop up and block the air circulation. The air flow draws in cool air to save the temperature dvery own when utilizing the dryer. Blockperiods are a fire danger but they will certainly practically absolutely cause your dryer to overwarmth and also stop functioning. If your dryer doesn’t have a recollection switch, it won’t be as easy as cleaning it out after the fuse has actually tripped – you will have to relocation its heating aspects to obtain it working aobtain.Opening the door mid-cycle or also shortly after the fill has actually finished. After a spin, tumble dryers need a cooling down period. You should enable for this prior to opening the door. If you don’t leave your dryer for a few minutes prior to rerelocating your laundry, you can expedition the TOC. Don’t open up the tumble dryer mid-way via the cycle or immediately after it stops; instead trust the timer and let the dryer cool down.Overloading the dryer. If you put also a lot in the dryer it will certainly block the airflow, aget resulting in temperatures to climb and also perhaps overwarm. There should be a maximum capacity discussed in your user manual however general dominion of thumb suggests your drum have to be about half complete. A prevalent reason world overpack their tumble dryer is a belief that multiple loads expense also much in power. This is actually a misconception – if you overload your dryer, your drum hregarding occupational twice as hard. This have the right to actually cost even more in power prices than doing multiple lots.

What is a thermostat and also TOC?

The thermostat monitors the temperature of the tumble dryer. It is associated to a heater element and opens up and also controls the circuit, elevating the temperature and cooling it dvery own. The thermostat knows as soon as to cool itself dvery own so will cshed the circuit through the aspect when it starts acquiring as well hot.

The TOC, or thermal overpack cut-out, protects against overheating, so if your tumble dryer does acquire too hot, it will certainly trip the circuit preventing the dryer heating. Sometimes this have the right to be reset yet even more commonly both the stat and also TOC will have to be reinserted.

How perform I relocation the TOC and also thermostat in my dryer?

First you have to test to check out whether tbelow is a circuit between these and whether they have actually actually failed. No circuit is confirmation that the TOC has actually tripped. You can check this through a continuity test meter.

If you’re certain this is the reason for the fault, you will certainly should unplug your appliance and also situate the thermostat. This have to be situated underneath the ago panel of your dryer so you will need to remove the back of your dryer.

Both your thermostat and also TOC are tiny round objects, they look like bottle tops, and also will have wires attached to either side of them. They need to likewise be screwed down onto the machine.

To relocation them:

Dislodge the wires and also unscrew the faulty parts.Get your brand-new replacement parts and screw in area of the old parts.Attach the wires to the steel arms on either side of the components. This is their connection to the heating element.Relocation the back of your tumble dryer.

See more: Why Does My Dryer Smell Like Gas Dryer Is Imparting A Gas Smell To Your Clothes

It is worth noting while many thermostats and TOCs are located under the back panel of the dryer, some deserve to be located at the front. Reaching these deserve to be rather tricky, so at this point it could be worth calling a experienced. If ever before in doubt don’t attempt and do this yourself. While the work is fairly straightforward, it does involve playing via electrics so if you’re ever before unsure seek skilled assist or advice.